Installing the MDF-panels

Installing the wooden panels

Installing the mouldings

Installing the corner blocks

FAQ

Very important to know before installing!
Make sure that every package has the same lot number. In that case the colour tone is exactly the same in every product.
Only install products with the same lot number to one space.




In case the panels have been stored in temperatures colder than those of the place of installation, let the temperature even out to match the conditions at the place of installation. This way you will avoid the harmful effects of temperature changes. Please open both ends of the plastic package to quicken the process.

Joists: every 40 cm / 16 inches.

Nailing: Use a stapler to attach the panels to joists. Measures of the staple: width 9 mm, length 25 mm and gauge 1,5-2 mm. Nail the panels from the long rear lip of the groove.

Please remember to take into account the end tenured joints in the ceiling. E.g. you can do the continuation so, that every other panel is continuating from the same place: | | - | | - | |

You can also extend panel with another via joint moulding (749-00) or then use end tenured joints. Both systems are quite hardly noticeable.

Giving finishing touch: Cover all the wall/ceiling joints with Listatalo cornice mouldings.
Small bruises to any mouldings during the work you can paint e.g with Tikkurila Empire, tone NCSS- 0502-Y